Chloroethane

Chloroethane does not occur naturally in the environment. Safe Home offers a few kits that provide drinking water testing for chloroethane in city and well water supplies.

Parameter Type: Drinking Water Testing for Volatiles

Parameter Name: Chloroethane

What it is and Where it Comes From:

Chloroethane, commonly known as ethyl chloride, is a chemical compound with chemical formula CH3CH2Cl, once widely used in producing tetraethyllead, a gasoline additive. It is a colorless, flammable gas or refrigerated liquid with a faintly sweet odor. Chloroethane has been used as a refrigerant, an aerosol spray propellant, an anesthetic, and a blowing agent for foam packaging. Chloroethane does not occur naturally in the environment. It is present in the environment because of human activity. In the past, the largest single use for chloroethane was to produce tetraethyl lead, which is a gasoline additive. Most of the chloroethane released to the environment ends up as a gas in the atmosphere, while much smaller amounts enter groundwater because of passage through soil. In groundwater, chloroethane changes slowly to ethanol and a chloride salt because of reaction with water. In addition, some types of bacteria present in the water may break down chloroethane to smaller compounds. However, not enough is known about chloroethane to be sure if this occurs or how long it may remain in groundwater. Drinking water testing gives you several benefits like peace of mind, identifying contaminants in your water, and insight into health concerns. Safe Home offers Laboratory drinking water testing kits for chloroethane, allowing you to collect your water sample and ship it directly to our EPA-Certified Laboratory. This platform of drinking water testing for chloroethane will give you an accurate level based on the lowest level of a parameter our instruments can detect (Method Detection Level). Safe Home drinking water testing for volatiles can be used for city and well water supplies. Drinking water testing should be done any time you notice a significant change in your water quality.

Health Effects:

Based on the limited amount of information available on the occurrence of chloroethane in drinking water, it can be concluded that extremely low levels of chloroethane may occur in some drinking water supplies because of formation during chlorination, contamination of rivers and lakes used as drinking water supplies, or seepage into groundwater resulting from storage of chemical wastes or disposal at waste sites. However, there is not enough information available to indicate what levels of chloroethane occur in drinking water under these circumstances. No data were located that indicate that chloroethane is found in food. There are no human cancer data available for ethyl chloride.

Solutions to Contaminant Levels:

What are the next steps after drinking water testing? Chloroethane can be reduced by activated carbon or reverse osmosis. A filter with granular activated carbon (GAC) is a proven option to remove certain chemicals, particularly organic chemicals, from water. GAC filters also can be used to remove chemicals that give objectionable odors or tastes to water such as hydrogen sulfide (rotten eggs odor) or chlorine. Reverse osmosis is a process that removes foreign contaminants, solid substances, large molecules, and minerals from water by using pressure to push it through specialized membranes. Here’s how reverse osmosis works. Unlike osmosis, which is a passive process, reverse osmosis requires external force (pressure) to work. Pressure is applied to a highly concentrated solute solution, such as salt water, to pass through a membrane to a lower concentrate solution. The membrane allows water to flow through but blocks out larger molecules, like contaminants. The reverse osmosis process leaves higher concentrations of solute on one side and only the solvent, or freshwater, on the other. Who do I need to contact to find out more information about water quality in my area? Every community water supplier must provide an annual report to its customers, known as a Consumer Confidence Report (CCR). The report provides information on your local drinking water quality, including the water’s source, contaminants found in the water, and how consumers can get involved in protecting drinking water. How often does the local public water system preform drinking water testing? Frequency of drinking water testing depends on the number of people served, the type of water source, and types of contaminants. Certain contaminants are tested more frequently than others, as established by the Safe Drinking Water Act. You can find out about levels of regulated contaminants in your treated water for the previous calendar year in your annual Consumer Confidence Report (CCR).

MCL’s: None
MCLG’s: None

File Under: Volatiles

Scroll to Top